Product Features:
ProFume Nut & Spigot
Telone Nut & Spigot
US Methyl Bromide Nut (old style)
US Methyl Bromide Spigot (new style)
Product Features:
Product Features:
Rig and Hardware Methyl Bromide
Dispensing and measuring equipment
Product Features:
Rig and Hardware Methyl Bromide
Dispensing and Measuring Equipment
Product Features:
Rig and Hardware Methyl Bromide
Dispensing and Measuring Equipment
Product Features:
Rig and Hardware
Product Features:
Dispensing and Measuring Equipment
Rig and Hardware Soil
Product Features:
Dispensing and Measuring Equipment
Product Features:
Dispensing and Measuring Equipment
Rig and Hardware Methyl Bromide
Built to Order and Specifications
Product Features:
Dispensing and Measuring Equipment
Rig and Hardware Methyl Bromide
Built to Order and Specifications
Product Features:
Fumigation Monitor
Rig and Hardware Methyl Bromide
Fumigation Monitors ProFume Battery Operated ProFume Clearance Monitor (ppm) including hard carry case
Product Features:
The M.A.C 2640 CLIRcheck is equipped with one gas sampling inlet. Two limiting values (alarm levels) may be set separately in correspondence to existing requirements.
For measurement of the concentration the gas to be analyzed must be drawn into the sensor by the built-in pump (active sample extraction). The measured values are shown on the display and are compared to the limiting values set.
The 1. Alarm level and the 2. Alarm level can be set individually. Overshoot of the first alarm level causes an audible alarm together with a low frequent flashing of display backlight. Exceeding the second alarm level leads to a higher frequency of audible alarm and display flashing. The audible alarm can be suppressed by pushing the ‘AUDIO’ button. Activated audio supression will be indicated by the red light beside the button.This suppression will be reset after the alarm state has ended and the audible alarm is armed again for the next occurence.
Fumigation Monitors Hardware ProFume
Product Features:
The M.A.C 2640 PROcheck is equipped with one gas sampling inlet. Two limiting values (alarm levels) may be set separately in correspondence to existing requirements.
For measurement of the concentration the gas to be analyzed must be drawn into the sensor by the built-in pump (active sample extraction).
During the measuring process a large number of measured values are integrated. The resulting values are shown on the display and are compared to the limiting values set.The 1. Alarm level and the 2. Alarm level can be set individually. The two alarm levels are defined as a window. This function can be used for surveillance of gas concentrations between a minimum and a maximum level.
Undershoot of the first alarm level causes an audible alarm together with a low frequent flashing of display backlight.
Exceeding the second alarm level causes the audible alarm and the flashing of display backlight with a faster repeat rate. The audible alarm can be suppressed by pushing the ‘AUDIO’ button. Activated audio supression will be indicated by the red light beside the button.This suppression will be reset after the alarm state has ended and the audible alarm is armed again for the next occurence.
Product Features:
Fumigation Monitors
Hardware ProFume
Product Features:
Fumigation Monitors
Hardware ProFume
Fumigation Monitors. The Riken FI-8000P Anesthetic Gas Indicator, is a light weight, mobile and easy to use solution to test anesthetic vaporizers concentration output. Based on optical interometer principle, the FI-8000P measures the anesthetic gas output for Isoflurane, Sevoflurane, Desflurane & Halothane.
Product Features:
Simply put, the GX-6000 is a game changer, because this powerful hand-held instrument is capable of simultaneously monitoring up to 6 gases.
Including the standard 4 confined space gases which incorporates combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR, or super toxic sensors.
PID SensorEquipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilising all 6 channels.
This one to six gas monitor with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard.
Choosing from the library is easy with a personalised favourites list of 30 commonly used VOC’s as well as a list of 8 of the most recently used VOC’s.
Rugged DesignThe GX-6000 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating.
With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives, and because of the vibration and loud audible alarms, the one to six personal monitor will easily alert users when needed.
Product Features:
Product Features:
Including Injection system and solenoids.
RIG1.8
RIG2.1
Product Features:
Soil Fumigation Rig